TM 9-2540-205-24&P
WIRING HARNESS - ESPAR V7S
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Key, socket-head screw, square drive, 2.5-mm
(Item 3, Appendix B)
Materials/Parts
Equipment Condition
Sealant, silicon (Item 6, Appendix C)
Hood removed (page 3-135)
Tags, marking (Item 9, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1.
2.
3.
4.
5.
6.
7.
NOTE
Tag all wires, connectors, and terminals to aid during installation (page 2-3).
Three clamps (1) and
Three screws (3)
heater (2)
a. Prior to removal, mark position
of clamps (1) and heater.
b. Unscrew and remove.
Heater (2) and wiring
Three clamps (1)
Remove.
harness (4)
Two clamps (5) and
Two screws (6)
a. Prior to removal, mark position
heater (2)
of clamps (5) and heater.
b. Unscrew and remove.
Heater (2) and wiring
Two clamps (5)
Remove.
harness (4)
Bracket (7) and two
Eight screws (9), nuts (10),
Unscrew and remove.
connector receptacles (8)
and washers (11 )
Temperature sensor (1)
Connector (2)
Remove.
Overheat switch (3)
Two connectors (4)
a. Cut off sealant.
b. Remove.
3-154
