WIRING HARNESS - ESPAR V7S - Continued
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION - Continued
28. Fixed wire resistor
terminal (1)
29. Terminal board (3)
30. Solenoid valve connector (5)
31. Thermostatic switch
connector (7)
32. Overheat switch (9)
33. Temperature sensor (11 )
34. Bracket (13) and two
connector receptacles (14)
35. Heater (18) and wiring
harness (19)
36. Two clamps (20) and
heater (18)
37. Heater (18) and wiring
harness (19)
38. Three clamps (22) and
heater (18)
Dual lead (2)
Two leads (4)
Connector (6)
Connector (8)
Two connectors (10)
Connector (12)
Eight washers (15), screws (16),
and nuts (17)
Two clamps (20)
Two screws (21 )
Three clamps (22)
Three screws (23)
a. Install.
b. Apply sealant to terminals
and leads.
a. Install.
b. Apply sealant to terminals
and leads.
Push together,
Push together.
a. Install.
b. Apply sealant to terminals
and leads.
Install.
Screw in and tighten.
Install, noting positions marked
during removal.
Screw in and tighten.
Install, noting positions marked
during removal.
Screw in and tighten.
3-159
TM 9-2540-205-24&P
