TM 9-2540-205-24&P
BLOWER MOTOR AND IMPELLER - ESPAR V7S - Continued
LOCATION
ITEM
ACTION
REMARKS
REMOVAL - Continued
8. Motor (1)
Two screws (2)
Unscrew and remove.
9. Casing (3)
Motor (1)
Remove.
10. Connector (4)
Connector (5)
Pull apart.
INSTALLATION
11. Connector (5)
12. Burner assembly (6)
13. Motor (1)
14. Burner assembly (6)
15. Support ring (8)
16. Motor (1)
17. impeller (10)
18. Mounting bracket
clamp (12)
19. Casing (3)
20. Casing (3) and cap (14)
Connector (4)
Motor (1)
Two screws (2)
Support ring (8)
Three screws (9)
Impeller (10)
Retaining clip (11)
Screw (13)
Cap (14)
Six screws (15)
a. Push together.
b. Push down along side of
burner assembly (6).
a. Install.
b. Turn shaft until it is engaged
in coupler (7).
Motor wIII seat against
heat exchanger when
coupler is engaged.
Screw in and tighten.
Install.
Notch must be placed
over motor lead slot.
Screw in and tighten.
a. Install.
b. Turn until pegs on shaft and
keying slots engage.
Install.
Screw in and tighten.
Install.
Screw in and tighten.
3-186
