TM 9-2540-205-24&P
BURNER ASSEMBLY AND HEAT EXCHANGER = ESPAR V7S
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, Mechanics Gen (Item 1, Appendix B)
Materials/Parts
Gasket, burner assembly
Mask, protective
Personnel required
63G
Equipment Condition
Wiring harness removed (page 2-1 54)
Solenoid valve removed (page 3-152)
Temperature sensor removed
(page 3-140)
Overheat switch removed (page 3-148)
Thermostatic switch removed
(page 3-142)
Igniter spark generator removed
(page 3-136)
Fixed capacitor removed (page 3-146)
Terminal board removed (page 3-150)
Fixed wire resistor removed
(page 3-146)
Glow plug removed (page 3-138)
Mounting assembly removed
(page 3-163)
Radio filter removed (page 3-1 83)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
Heat exchanger Iinings contain asbestos fibers. Protective mask must be
worn while performlng this task. Failure to do so could result in injury or death
to personnel.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Casing (1) and hood (2)
Three screws (3)
Casing (1)
Hood (2)
Two screws (4)
Clamp (5)
Screw (6)
Fuel tube (7)
Fuel hose (8) with clamp (5)
Casing (1)
Grommet (9)
Heat exchanger (1 O)
Casing (1)
Grommet (11 )
Burner assembly (12)
Six nuts (13)
Unscrew and remove,
Remove.
Unscrew and remove.
Unscrew part way.
Twist and remove,
Pry off.
a. Spread apart.
b. Remove.
Pry off.
Unscrew and remove.
3-188
WARNING
