THERMOSTATIC SWITCH (FLAME DETECTOR SWITCH) - STEWART-WARNER 10560C24, 10560M,
1056OM24B1, 1056OG
This task covers:
a. Removal
c. Adjustment
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Mechanics Gen (Item 1, Appendix B)
Guard removed (page 2-42)
Materials/Parts
Sealant, silicon (Item 6, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
1. Flame detector switch (1)
Four screw assemblies (2) and Unscrew and remove.
leads (3)
2. Flame detector switch (1) and
Nut (5)
Unscrew until threads are free.
heater (4)
3. Heater (4)
Flame detector switch (1)
Lift straight out.
INSTALLATION
4. Heater (4)
Flame detector switch (1)
a. Insert straight into hole.
b. Turn so adjustment screw (6) is
away from overheat switch (7).
5. Flame detector switch (1) and Nut (5)
Screw on and tighten.
heater (4)
6. Flame detector switch (1)
Four screw assemblies (2) and Screw in and tighten.
leads (3)
2-43
TM 9-2540-205-24&P