UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN <a href="http://spacewaterheating.tpub.com/20/01-329-3451.htm">4520-01-329-3451</a> BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR

H- 45 TYPE I (SOLID FUEL) HEATER CONT. - TM-9-4520-257-12P_160

UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR CONT. - TM-9-4520-257-12P_162

TM-9-4520-257-12P Compressor Air Rotary Diesel Engine Driven Skid Mounted 125 cfm at 100 psi Manual
Page Navigation
121 4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR CONT. - TM-9-4520-257-12P_162" class="tooltip">122 4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR CONT. - TM-9-4520-257-12P_163" class="tooltip">123 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_165" class="tooltip">124 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE CONT." class="tooltip">125 4520-01-329-3451 FLOW CONTROL BURNER HOSE REPLACE - TM-9-4520-257-12P_168" class="tooltip">126

TM 9-4520-257-12&P 0035 00 UNIT MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE II, LIQUID FUEL) NSN 4520-01-329-3451 BURNER SHELL ASSEMBLY INSPECT, SERVICE, REPAIR 0035 00-1 INITIAL SETUP : Tools General Mechanic’s Tool Kit (WP 0041 00, Table 2, Item 1) Materials/Parts Absorbent Material (WP 0052 00, Table 1, Item 1) Pipe Thread Compound (WP 0052 00, Table 1, Item 6) Rags (WP 0052 00, Table 1, Item 7) Personnel Required One References WP 0005 00, WP 0014 00, WP 0022 00, WP 0024 00, WP 0036 00 Equipment Condition Heater shut down and cool (WP 0005 00) Top heater shell removed (WP 0014 00) Burner cap assembly removed (WP 0022 00) Superheater assembly removed (WP 0022 00) High fire ring removed (WP 0024 00) H-45 TYPE II (LIQUID FUEL) HEATER REMOVE 1. Turn the fuel OFF/ON control (1) on the fuel flow control valve (2) to the OFF position. 2. Place a petroleum absorbent mat under the fuel flow control valve. 3. Disconnect the flow control burner hose (3) from fuel flow control valve (2). 4. Remove the fuel flow control valve (2) from the heater body base (4), and place it on the petroleum absorbent mat. 5. Lift the burner shell assembly (5) vertically out of the heater body base (4). 6. Remove the pipe nipple (6). 7. Remove the reducer bushing (7). 8. Remove the elbow fitting (8). INSPECT 1. Examine the inside of the elbow fitting (8) for dirt, soot, and fuel residue. 2. Examine the pipe nipple (6) and reducer bushing (7) for fuel sludge and deposits and for crimps or bends that restrict fuel flow.

Privacy Statement
Press Release
Contact