TM 9-4520-258-14
4-20.
REAR PANEL ASSEMBLY - continued.
d.
Assembly - continued (Refer to Figure 4-19)
(12) Hold selector valve (27) in left hand with the half moon shaped handle stop on top.
(a) Look in right side opening to ensure valve is open to that side.
(b) If it is not, use handle to turn valve stem 180°.
(13)
Place selector valve (27) in soft faced vise and install elbows (28) and (29) and straight connector
(30). Remove selector valve (27) from vise.
(14)
Install selector valve (27) with half moon shaped handle stop on top and nut (31).
(15)
Install handle (32) and secure with screw (33).
(16)
Install quick-disconnect coupling (34) and nut (35).
(17)
Install tubing (36) (Item 77, App F) on elbow (29) and quick-disconnect coupling (34).
Figure 4-19. Rear Panel Assembly (Sheet 3 of 3)
4-82
