TM 9-4520-258-14
4-20.
REAR PANEL ASSEMBLY - continued.
e.
Installation (Refer to Figure 4-20)
(6)
Remove any covers from tubing (7) and (8). Connect tubing (7) (Item 81, App F) to elbow (9) and
tubing (8) (Item 80, App F) to straight connector (10).
(7)
Install dust cap (11) onto quick disconnect coupling (12).
(8)
Install isolator frame (13), ten flat washers (14), ten lockwashers (15) and ten screws (16).
(9)
Apply sealant (Item 4, App E) around exhaust pipe (17).
(10)
Install seal plate (18), four flat washers (19), four lockwashers (20), and four screws (21).
(11)
Install cover (22) and secure with four screws (23).
4-84
