TM 9-4520-271-14
0029 00
REMOVAL
WARNING
Use care when using the jack assembly or when raising or lowering the wheel assemblies. Fingers or hands
may be pinched causing injury to personnel.
1.
Extend jack assembly (1), remove pin (2), place wheel assembly (3) in down position, and insert pin (2).
2.
Retract jack assembly (1) until front of ASH (4) is resting on ground.
3.
Remove four screws (5), lockwashers (6), washers (7), fuel drain cover (8), and gasket (9). Discard lockwashers.
0029 00-2
