TM 9-4520-271-14
0029 00
DISASSEMBLY
Continued
NOTE
Notice the orientation of the filler neck and the fuel gage neck to ensure correct assembly.
5.
Remove 12 space adapters (14), filler neck (15), and fuel gage neck (16).
6.
Remove drain plug (17).
7.
Remove four locknuts (18), four washers (19), and ring washer (20). Discard locknuts.
8.
Remove drain port (21) and preformed packing (22).
REPAIR
Repair is limited to replacement of defective parts.
ASSEMBLY
1.
Apply gasket sealing compound to drain port (21) and ring washer (20).
2.
Install preformed packing (22) and drain port (21).
3.
Apply gasket sealing compound and install ring washer (20), four washers (19), and locknuts (18).
4.
Install drain plug (17).
5.
Apply sealing compound to 12 space adapters (14).
6.
Install fuel gage neck (16), filler neck (15), and 12 space adapters (14) per orientation noted during disassembly.
0029 00-5
