TM 9-4520-271-14
0030 00
REMOVAL
1.
Open side rear door (1) and side front door (2).
2.
Disconnect hose assembly (3) and tube assemblies (4 thru 6).
3.
Open control panel. Tag and disconnect two wires TB2-7/L1-BLK (7) and TB2-4/L2-BLK (8) from terminal board TB2
(9).
4.
Cut wire ties as required.
5.
Tag and disconnect wire TB1-8/L1-BLK (10) with solenoid valve L1 lead (11), terminal splice (12), and terminal lug
(13) attached from terminal board TB1 (14).
6.
Tag and disconnect wire S4-1/L2-BLK (15) with solenoid valve L2 lead (16), terminal splice (17), and terminal lug (18)
attached from PURGE SWITCH S4 (19).
7.
Route all disconnected wires down through conduit (20).
0030 00-2
