TM 9-4520-271-14
0029 00
INSTALLATION - Continued
6.
Install gasket (9), fuel drain cover (8), four washers (7), lockwashers (6) (item 28, WP 0062 00), and screws (5).
WARNING
Use care when using the jack assembly or when raising or lowering the wheel assemblies. Fingers or hands
may be pinched causing injury to personnel.
7.
Extend jack assembly (1), remove pin (2), place wheel assembly (3) in up position and install pin (2).
8.
Retract jack assembly (1) until front of ASH (4) is resting on ground.
9.
Refill fuel tank with fuel.
END OF WORK PACKAGE
0029 00-8
