TM 9-4520-272-14&P
0002 00
MAIN CONTROL BOX ASSEMBLY.
Located on the interior of the LCFH near the
diesel engine, the main control box contains
the printed circuit board and other
associated circuitry required to operate the
heater.
BURNER ASSEMBLY. The burner
assembly is designed to be used with a
variety of approved military fuels and is
located behind the heat exchanger. The
burner atomizes and burns the incoming fuel
from the fuel pump.
HEAT EXCHANGER. The heat exchanger,
NOTE: Heat
positioned on the heated air outlet side of
exchanger access
the heater, is designed to transfer the heat
cover removed for
generated by the burner to the fresh air
illustrative clarity.
being drawn in by the fresh air inlet fan. This
is done without mixing any of the
combustion gases with the breathable air
being made available to the shelter.
0002 00-13
