TM 9-4520-272-14&P
0084 00
INSTALL continued
7. Apply grease to lips of crankshaft oil seal (located in crankcase cover (1)).
8. Apply oil to crankshaft and camshaft. Make sure that oil pump drive gears are properly engaged.
9. Mate cover gasket (3) to cylinder block.
10. Mate crankcase cover (1) to cylinder block and secure using fifteen screws (2). Tighten screws in
crisscross sequence as shown. Torque all screws to 14.5 to 16.6 ft-lbs. (200 to 230 kg-cm).
11. Install fuel injection pump (WP 0074 00).
12. Service engine oil (WP 0046 00).
15
0084 00-4
