T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
F R A M E 3
Remove Cable and Cord Assemblies:
1.
2.
3.
4.
5.
6.
GO
NOTE
Read paragraph 2-4 on soldering and tagging wires before
doing any work.
Take potting compound (1) off of toggle switch (2) with knife.
Tag and unsolder two wires (3) from switch (2).
Unscrew and take out machine screw (4), lockwasher (5), flat washer (6), and plain
hexagon nut (7) with screwdriver and 11/32-inch wrench. Get rid of lockwasher (5).
Unscrew and take out machine screw (8), lockwasher (9), flat washer (10), and plain
hexagon nut (11) with 1/4-inch wrench. Get rid of lockwasher (9).
Take off loop clamp (12). Disconnect plug (13) and lift cable assembly (14) and cord
assembly (15) off of bracket (16).
Look at assembly (14, 15) for cracked or split wires. lf bad, GO TO FRAME 4. If
OK, set aside for later use.
TO FRAME 4
Volume IV
3-36
Para. 3-7, Task 3
