T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
FRAME 5
Remove Switch:
NOTE
Read paragraph 2-4 on soldering and tagging wires before
doing any work.
1.
Take potting compound (1) off of toggle switch (2) with knife.
2.
Tag and unsolder two wires (3) from switch (2).
3.
Unscrew and takeoff nut (4) from switch (2) with pliers. Look at switch (2) for
cracks, breaks, or bad contacts. If bad, turn in. If OK, set aside for later use.
Follow-on Maintenance:
NOTE: To install toggle switch S1, refer to task 10.
TASK 4 ENDS HERE
Volume IV
Para. 3-7, Task 4
3-39
