TM 9-4931-381-14&P-2
FRAME 13
Remove Structure:
1.
2.
3.
4.
5.
6.
Take off bard assembly A1TB1 (1) for access only; refer to task 5.
Unscrew and take out machine screw (2), 2 flat washers (3), lockwashers (4), and
hexagon plain nut (5) from semiconductor device (6) with screwdriver and wrench.
Unscrew and take out six machine screws (7) and flat washers (8) from front of panel
assembly (9) with screwdriver and wrench.
wires
Genly pull and rock top part of light-switch S2 (10) to separate.
CAUTION
Use caution when removing structure. Do not damage
NOTE
Take off electrical tiedown strap (11) as needed to take
structure (12) off of panel (9).
Lift wiring harness (13) to take off structure (12).
Take structure (12) off rear of panel (9) and turn in structure (12).
GO TO FRAME 14
Volume IV
Para. 2-6, Task 7
2-51
