T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 26
Install Light-Switch:
1.
2.
3.
4.
5.
6.
Put Iight-switch (1) through panel assembly (2) so top is up and slide bracket (3) over
light-switch (1).
Turn two screws (4) clockwise with screwdriver so bracket (3) is locked onto light-
switch (1).
Solder eight wires (5) to light-switch (1). Put back half of Iight-switch (1) in place
on light-switch (1).
Solder seven wires (6) to light-switch (1). Refer to frame 27 for wiring chart.
Put new lacing tape around wires (5) and light-switch (1).
Put lampholder (7) into Iiqht-switch (1) and turn one-quarter turn clockwise. Push in
until lampholder (7) seated in Iight-switch (1).
GO TO FRAME 27
Volume IV
Para. 2-6, Task 12
2-69
