• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
H-45 TYPE I (SOLID FUEL) AND TYPE II (LIQUID FUEL) HEATERS CONT.
H-45 TYPE I (SOLID FUEL) HEATER CONT.

TM-9-4520-257-12P Compressor Air Rotary Diesel Engine Driven Skid Mounted 125 cfm at 100 psi Manual
Page Navigation
  76    77    78    79    80  81  82    83    84    85    86  
TM 9-4520-257-12&P                                                      0015 00 OPERATOR MAINTENANCE H-45 LARGE RADIANT SPACE HEATER (TYPE I, SOLID FUEL) NSN 4520-01-354-1191 ADAPTER RING INSPECT, SERVICE, REPLACE 0015 00-1 INITIAL SETUP:    Materials/Parts   Brush (WP 0052 00, Table 1, Item 3) Rags (WP 0052 00, Table 1, Item 7) Personnel Required One References WP 0005 00 Equipment Condition   H-45 shutdown and cool (WP 0005 00) Guy lines anchoring stack pipe untied from                stakes (WP 0005 00) H-45 TYPE I (SOLID FUEL) HEATER REMOVE 1.    Remove the stack pipe assembly (1) from the stack flange (2) on the top heater shell (3). 2.    Loosen the wing nuts on the bolt and wing nut assemblies (4) holding the top heater shell (3) to the heater body base (5), remove the bolt and wing nut assemblies (4) from the brackets (6), and remove the top heater shell (3).  Remove the grates (7) and adapter ring (8). INSPECT Inspect the adapter ring (8) for cracks, distortion, holes burned through, or rust.    SERVICE Clean any soot or carbon deposits from adapter ring (8) with a rag or a brush. REPLACE Replace the adapter ring (8) if damaged. INSTALL (REFER TO WP 0005 00) 1.    Install the adapter ring (8). 2.    Install the grates (7). 3.    Install the top heater shell (3).   4.    Install the stack pipe assembly (1).







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.