• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Preparing The H-45 Type I (Solid Fuel) Heater For Movement
H-45 Type I (Solid Fuel) Heater Lubrication Requirements

TM-9-4520-257-12P Compressor Air Rotary Diesel Engine Driven Skid Mounted 125 cfm at 100 psi Manual
Page Navigation
  24    25    26    27    28  29  30    31    32    33    34  
    TM 9-4520-257-12&P                                                      0005 00 0005 00-13 7.    Remove the grates (10,11) and the adapter ring (12) from the heater body base (9). 8.    Clean all components of soot, carbon buildup, and fuel residue using a rag and/or brush (not included). 9.    Place the grates (10,11); lid assembly (14); shaker, poker, and shovel (15); spark arrester (16); stack cap with guy lines (5,1); adapter ring (12); and the stack section containing the flue damper (17) in the heater body base (9). NOTE The only stack section that is stored in the heater is the one containing the flue damper.  The other five sections should be transported outside the heater. 10. Return the top heater shell (8) to the heater body base (9), place the bolt and wing nut assemblies (7) in the brackets (13), and tighten the wing nuts (7).  Close the grate heater door (18) and close and lock the front and rear base heater doors (19). 6 1 4 2 3 15 14 8 10 11 7 12 9 5 13 16 17 18 19 PREPARING THE H-45 TYPE I (SOLID FUEL) HEATER FOR MOVEMENT







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.