• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
PURGE SWITCH S4 and FLAME RESET Switch S7 Installation
9POWER Indicator PS1, HIGH TEMP Indicator DS2, FLAME OUT Indicator DS3, and CARBON MONOXIDE ALARMS LIGHT DS4 Installation

TM-9-4520-271-14 Improved Army Space Heater (IASH) Electric Powered Multi-fuel 140 000 BTU Model H-140 Manual
Page Navigation
  219    220    221    222    223  224  225    226    227    228    229  
TM 9-4520-271-14
0026 00
ASSEMBLY
Continued
CARBON MONOXIDE ALARM Installation
1.
Install CARBON MONOXIDE ALARM (4) and mounting ring (3).
2.
Connect two wires (1) with screws (2). Remove wire marker tags.
WARNING
Acrylic lacquer sealant is flammable. Keep away from open flames or other sources of ignition. Avoid
breathing fumes from sealant. Good general ventilation is normally adequate. Avoid skin contact with
sealant.
3.
Apply light coat of acrylic lacquer sealer to carbon monoxide detector (4) terminals.
0026 00-23






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.