TM 9-4520-271-14
0026 00
ASSEMBLY
Continued
POWER Indicator PS1, HIGH TEMP Indicator DS2, FLAME OUT Indicator DS3, and CARBON MONOXIDE
ALARMS LIGHT DS4 Installation
NOTE
Procedures are typical for POWER indicator PS1, HIGH TEMP indicator DS2, FLAME OUT indicator
DS3, and CARBON MONOXIDE ALARMS LIGHT DS4. FLAME OUT DS3 indicator is shown.
1.
Install seal (5), FLAME OUT indicator DS3 (4), lockwasher (3), and nut (2).
2.
Connect two wires (1). Remove wire marker tags.
0026 00-24