TM 5-3895-377-13&P
NOTE
Tag and mark all wires prior to
removal.
(5)
Remove two nuts (7), lock washers (8),
washers (9), and wires (10 and 11) from
terminals (12 and 13). Discard lock
washers.
(6)
Remove screw (14) and wire (15) from
bumper (4).
b.
Installation.
(1)
Install wire (15) and screw (14) in bumper
(4). Tighten screw.
(2)
Install two wires (10 and 11) with washers
(9), lock washers (8), and nuts (7) on
terminals (12 and 13). Tighten nuts.
(3)
Install lamp assembly (5) in grommet (6).
NOTE
Notch should be in the bottom
position when grommet is installed.
(4)
Install grommet (2) in bumper (4).
(5)
Connect connector to lamp assembly (1).
(6)
install lamp assembly (1) in grommet (2).
NOTE
Follow-on Maintenance: Remove wheel
chocks (page 2-35).
END OF TASK
4-83
