TM 5-3895-377-13&P
(4)
Remove nut (7), lock washer (8), washer
(9), and wire (10) from terminal (11).
Discard lock washer.
(5)
Remove terminal lug (12), contact (13), and
preformed packing (14) from wire (10).
Discard terminal lug and preformed
packing.
(6)
Remove wire (10) from marker light (4).
(7)
Remove two nuts (15), screws (16), marker
light (4), and gasket (17) from bumper (18).
Discard gasket.
b.
Installation.
(1)
Install gasket (17) and marker light (4) with
two screws (16) and nuts (15) on bumper
(18). Tighten nuts.
(2)
Install terminal lug (12) on wire (10).
(3)
Place wire (10) through bumper (18),
marker light (4), and socket.
(4)
Install preformed packing (14) and contact
(13) on wire (10).
(5)
Install wire (10) on terminal (11) with
washer (9), lock washer (8), and nut (7).
Tighten nut.
(6)
Install lamp assembly (5) in grommet (6).
(7)
Install lamp (3) in marker light (4).
(8)
Install preformed packing (2) and lens (1).
NOTE
Follow-on Maintenance: Remove wheel
chocks (page 2-35).
END OF TASK
4-85
