TM 5-3895-377-13&P
4-43. FRONT SIDE MARKER LIGHT REPLACEMENT (CONT).
(3)
Remove butt connector by cutting wires (5 and
6). Discard butt connector.
(4)
Loosen nut (7) and remove conduit (8) from
marker light (4).
(5)
Remove wire (6) from marker light (4).
(6)
Remove adapter (9) from marker light (4).
(7)
Remove two nuts (10), screws (11), marker light
(4), and gasket (12) from Heater (13). Discard
gasket.
b. Installation.
(1)
Install gasket (12) and marker light (4) with two
screws (11) and nuts (10) on Heater (13).
Tighten nuts.
(2)
Install adapter (9) in marker light (4).
(3)
Install wire (6) in marker light (4).
(4)
Install conduit (8) in marker light (4) and tighten
nut (7).
(5)
Connect wires (5 and 6) with butt connector.
(6)
Install lamp (3) in marker light (4).
(7)
Install preformed packing (2) and lens (1).
NOTE
Follow-on Maintenance: Remove
wheel chocks (page 2-35).
END OF TASK
4-92
