TM 5-3895-377-13&P
NOTE
Tag and mark all wires prior to removal.
(4) Loosen six screws (9) and remove six wires (10) from circuit breaker (11).
(5) Remove screw (12) and clamp (13) from backplate (14).
(6) Remove circuit breaker (11) from backplate (14).
b.
Installation.
(1) Position circuit breaker (11) in holddown bracket on backplate (14).
(2) Install clamp (13) and screw (12) on circuit breaker (11) and in backplate (14). Tighten screws.
(3) Install eleven wires (10) in circuit breaker (11) and tighten six screws (9).
4-175
