TM 5-3895-377-13&P
(
3) Loosen two screws (6) and remove three wires (7)
from pump motor relay (3).
(4) Loosen two screws (8) and disconnect two wires (9)
from pump motor relay (3).
(5) Remove four screws (10) and pump motor relay (3)
from backplate (11).
b. Installation.
(1) Install pump motor relay (3) and four
screws (10) on backplate (11). Tighten screws.
(2) Install two wires (9) and tighten screws (8).
(3) Install three wires (7) and tighten screws (6).
(4) Install two wires (5) in pump motor relay (3) and tighten two screws (4).
(5) Install four wires (2) in pump motor relay (3) and tighten screws (1).
NOTE
Follow-on Maintenance: Install thermal overload protector (page 4-178).
END OF TASK
4-181