TM 5-3895-377-13&P
NOTE
•
Tag and mark all wires prior to removal.
•
This paragraph discusses replacement of one switch. All switches are replaced in the same way.
(4) Loosen two screws (9) and remove two wires (10) from STOP switch (11) or three wires (10) from START switch (12).
(5) Remove nut (13), plate (14), switch (11 or 12), and gasket (15) from panel (8).
b. Installation.
(1) Install gasket (15), switch (11 or 12), plate (14), and nut (13) on panel (8).
(2) Install two wires (10), or three wires (10), and tighten two screws (9).
4-183
