TM 5-3895-377-13&P
4-78. PUMP REPLACEMENT (CONT)
(3)
Using a lifting device, position pump (1) on pump
mounting bracket (16) and install four screws
(10), lock washers (9), and nuts (8). Do not
tighten nuts.
(4)
Aline holes of plumbing section (14) and
plumbing section (18).
(5)
Position gasket (15) between plumbing sections
(14 and 18) and, with the aid of an assistant,
install four screws (13), lock washers (12), and
nuts (11). Tighten nuts to 110 lb.-ft (149 kg).
(6)
Tighten nuts (8 and 11) to 110 lb.-ft (149 kg).
(7)
With the aid of an assistant, install gasket (7)
and plumbing section (6) on plumbing section
(17) with four screws (5), lock washers (4), and
nuts (3).
(8)
Tighten nuts (3) to 110 lb.-ft (149 kg).
NOTE
Follow-on Maintenance:
•
Install pressure relief valve (para
4-217).
•
Install valve no. 2 (page 4-211).
•
Install sheave and belt guard
(page 4-203).
•
Fill expansion tank (page 3-14).
•
Remove wheel chocks (page 2-
35).
END OF TASK
4-198
