TM 5-3895-377-13&P
(2)
Install belt tensioning gage on belt (11).
(3)
Tighten adjusting screws (10) until belt tension reaches 55-65 lbs.
(4)
Remove four nuts (7) and lock washers (14) from four screws (8). Discard lock washers.
(5)
Install four lock washers (14) and nuts (7) on screw (8). Tighten nuts.
(6)
Remove belt tensioning gage from belt (11).
(7)
Install belt guard cover (3) on belt guard (6) with
six lock washers (5) and nuts (4). Tighten nuts.
(8)
Install three screws (1) and lock washers (2) on
belt
guard
cover
(3).
Tighten
screws.
NOTE
Follow-on Maintenance: Remove wheel chocks (page 2-35).
END OF TASK
4-201