TM 5-3895-377-13&P
4-82. STRAINER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic’s: Automotive
Two
Wrench, Torque
Equipment Condition
Materials / Parts
Wheels Choked (page 2-17)
Rags, Wiping (item 19, appendix E)
Heater Cooled
Gasket
Valves No. 1 and No. 2 Closed (pages 2-29
Drain Pan
and 2-30)
Gaskets (2)
Lock Washers (8)
Lock Washers (8)
a. Removal
WARNING
Oil is slippery and can cause falls. Wipe
up spilled oil with rags
NOTE
•
Plumbing section weighs 32 lbs (14.5 kg)
•
Strainer weighs 30 lbs (13.6 kg).
(1)
Place drain pan under plumbing section (1).
(2)
Remove four nuts (2), lock washers (3), and
screws (4) from plumbing section (1) Discard
lock washers.
(3)
With the aid of an assistant, remove eight nuts
(5), lock washers (6), screws (7), plate (8),
gaskets (9 and 10), and plumbing section (1)
from valve No. 1 (11) and strainer (12). Discard
lock washers and gaskets.
4-206
