TM 5-3895-377-13&P
(4)
With the aid of an assistant, remove eight nuts
(13), lock washers (14), screws (15), valve (11),
and gasket (16), from plumbing section (17).
Discard gasket and lock washers.
b. Installation.
(1)
With the aid of an assistant, position gasket (16),
valve (11), eight screws (15), lock washers (14),
and nuts (13) on plumbing section (17). Snug,
but do not tighten, nuts.
(2)
With the aid of an assistant, position gasket (10),
plumbing section (1), plate (8), eight screws (7),
lock washers (6), and nuts (5) on valve no. 1
(11). Snug, but do not tighten, nuts
(3)
Position gasket (9), four screws (4), lock
washers (3), and nuts (2) in plumbing section
(1). Snug, but do not tighten, nuts.
(4)
Aline plumbing section (1) with valve no. 1(11)
and strainer (12).
(5)
Tighten four nuts (2) to 110 lb.-ft (149 N.m).
(6)
Tighten sixteen nuts (5 and 13) to 200 lb.-ft (271
N.m).
NOTE
Follow-on Maintenance:
*
Fill expansion tank with oil (page 3-14).
*
Remove wheel chocks (page 2-35).
END OF TASK
4-209
