TM 5-3895-377-13&P
(
4)
With the aid of an assistant, remove four nuts
(13), lock washers (14), screws (15), strainer
(12), and gasket (16) from plumbing section
(17). Discard gasket and lock washers.
b. Installation.
(1)
With the aid of an assistant, position gasket
(16), strainer (12), four screws (15), lock
washers (14), and nuts (13) to plumbing section
(17). Snug, but do not tighten, nuts.
(2)
With the aid of an assistant, position gasket (10),
plumbing section (1), and plate (8) on valve No.
1 (11) with eight screws (7), lock washers (6),
and nuts (5). Snug, but do not tighten, nuts.
(3)
Position gasket (9), four screws (4), lock
washers (3) and nuts (2) in plumbing section (1).
Snug, but do not tighten, nuts.
(4)
Aline plumbing section (1) with valve No. 1 (11)
and strainer (12).
(5)
Tighten eight nuts (2 and 13) to 110 lb.-ft (149
N.m).
(6)
Tighten eight nuts (5) to 200 lb.-ft (271 N.m).
NOTE
Follow-on Maintenance: Remove wheel chocks (page 2-35).
END OF TASK
4-207
