TM 5-3895-377-13&P
4-83. VALVE NO. 1 REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic’s: Automotive
Two
Wrench, Torque
Materials /Parts
Rags, Wiping (item 19, appendix E)
Drain Pan
Equipment Condition
Gasket
Wheels Choked (page 2-17)
Gaskets (2)
Heater Cooled
Lock Washers (4)
Transfer Oil Drained (page 3-12)
Lock Washers (16)
a. Removal
WARNING
Oil is slippery and can cause falls. Wipe
up spilled oil with rags.
NOTE
Plumbing section weighs 32 lbs (14.5 kg).
(1)
Position drain pan under plumbing section (1 )
NOTE
Valve no. 1 weighs 63 lbs (28.6 kg).
(2)
Remove four nuts (2), lock washers (3), and
screws (4) from plumbing section (1). Discard
lock washers.
(3)
With the aid of an assistant, remove eight nuts
(5), lock washers (6), screws (7), plate (8),
gaskets (9 and 10), and plumbing section (1)
from valve no. 1 (11) and strainer (12). Discard
lock washers and gaskets
4-208
