TM 5-3895-377-13&P
Table 2-1
Preventive Maintenance Checks and Services
Location
Item
Interval
Item to
Procedure
Not Fully Mission
No.
Check/
Capable If:
Service
GENERAL
NOTE
•
If the equipment must be kept in continuous operation
done without disturbing operation. Make
checks and services when the equipment is
shut down.
•
Ensure that all daily/weekly
lubrication requirements are
performed on the vehicle as
directed in Chapter 3, Section I,
Lubrication Instructions.
•
Perform WEEKLY, as well as
BEFORE, PMCS if:
a. You are the assigned operator but
have not operated the equipment
since the last WEEKLY.
b You are operating the equipment
for the first time.
•
Levers, pins, linkage, etc., not
equipped with lubrication fittings,
should operate freely and be clear
levels, ensure vehicle is on level
surface for accurate reading.
WARNING
•
Read and understand all of the
safety precautions and warnings
before performing any checks and
services or personal injury can
result.
1
Before
Perform walk-around inspection of Heater
During/
Check for leaks or obvious damage that would require
Class III leaks or any
After
more detailed inspection.
fuel leaks.
2-9
