TM 5-3895-377-13&P
Table 2-1. Preventive Maintenance Checks and Services - CONT.
Item
No.
Interval
Location
Item to
Check/Service
Procedure
Not Fully Mission
Capable If:
RIGHT SIDE
OF HEATER
12
Before
Screw Jacks
Visually inspect for obvious damage
Screw Jacks are
damaged or missing.
13
Before
Fire
Visually Inspect for missing, damaged.
Fire Extinguisher is
Extinguisher
or loose fire extinguisher.
missing or damaged
Check to ensure plastic tie is unbroken.
Plastic tie is broken or
missing
14
During
Control Panel
Inspect panel for damage and
Controls and gages are
unserviceable controls and gages
damaged or not
Monitor gages regularly for proper
functioning
temperature readings.
a.
Transfer oil temperature 475F
Temperature is in
(246C) max (temp setting)
excess of 475F (246C}.
b.
Transfer oil temperature 475F
Temperature is in
(246°C) max (limit setting)
excess of 475F (246C).
15
Before/
Low Oil Level
Visually inspect for low oil level in
Oil level is below
During/
Indicator
expansion tank
acceptable range.
After
2-12
