TM 5-3895-377-13&P
4-95.
BURNER COIL REPLACEMENT (CONT).
(7) Remove three screws (21), lock washers (22), and
controller subbase (5) from subbase plate (23). Discard
lock washers.
(8) Remove controller subbase (5) from twelve wires.
(9) Remove two screws (24) and subbase plate (23) from
electrical box (25).
(10)
Remove nut (26) from coil (27).
(11)
Remove coil (27) and four wires from electrical
box (25).
b.
Installation.
(1) Insert four wires and coil (27) in electrical box (25).
(2) Install nut (26) on coil (27).
(3) Install subbase plate (23) with two screws (24) on
electrical box (25).
(4) Install controller subbase (5) on twelve wires.
(5) Install controller subbase (5) with three screws (21)
and lock washers (22) on subbase plate (23).
4-262
