TM 5-3895-377-13&P
4-96.BURNER SOLENOID REPLACEMENT (CONT).
NOTE
Mark position of fitting before
removal.
(7) Place solenoid valve (20) in vise.
(8) Remove adapter (21) from tee (22).
(9) Remove plug (23) from tee (22).
(10)
Remove tee (22) from solenoid valve (20).
(11)
Remove elbow (24) from solenoid valve (20).
(12)
Remove solenoid valve (20) from vise.
b.
Installation.
(1) Place solenoid valve (20) in vise.
(2) Install elbow (24) on solenoid valve (20).
(3) Install tee (22) on solenoid valve (20).
(4) Install plug (23) on tee (22).
(5) Install adapter (21) on tee (22).
(6) Remove solenoid valve (20) from vise.
(7) Install solenoid valve (20), nut (19), and nipple (18) in
electrical box (7). Tighten nipple.
(8) Connect wires (14, 15, 16, and 17) and install wire nut
(13).
(9) Connect wires (9, 10, 11, and 12) and install wire nut
(8).
4-266
