TM 5-4520-208-15
Figure 44. Wheel, axle, and spring assemblies, exploded view.
Inspect the rollers in the bearing
(6) Replace the seal and all damaged
cones for looseness or discoloration
parts.
due to overheating. Inspect the outer
e. Reassembly.
and inner bearing cups for pits,
(1) Install valve core (27) in valve stem.
(2) Install five ribbed shoulder bolts (1)
grooves, and discoloration due to
overheating. The bearings and cups
in hub assembly (2).
must have a bright, smooth metallic
(3) Install inner tube (7) in pneumatic
finish.
tire (8) and partially inflate the tube.
77
