TM 5-4520-241-14
1.
Right side louvered panel
9.
Cotter pin
2.
Stud turnlock fastener
10.
Washer
3.
Push-on nut
11.
Spring
4.
Left side louvered panel
12.
Louver operating handle
5.
Cotter pin
13.
Nut
6.
Washer
14.
Screw
7.
Spring
15.
Pivot control bar
8.
Louver linkage
Figure 4-18. Side panels and louver linkage.
(2) Remove cotter pins (5), washers (6), and spring (7) to remove louver linkage (8).
(3) Remove cotter pin (9), washer (10), and spring (11) to remove louver operating handle (12).
(4) Remove nut (13) from screw (14) to remove the pivot control bar (15) from the bulkhead.
4-52
