TM 5-4520-253-13
Section Il. REPAIR PARTS, SPECIAL TOOLS, TEST MEASUREMENT
DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT
3-3. COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
3-4. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
For special tools, TM DE, and support equipment, refer to Appendix B and to the repair parts and special tools list,
TM 5-4520-253-23P, covering unit and intermediate maintenance for this equipment.
3-5. REPAIR PARTS
Repair parts are listed and illustrated in the repair parts and special tools list, TM 5-4520-253-23P, covering unit
and intermediate maintenance for this equipment.
Section Ill. SERVICE UPON RECEIPT OF EQUIPMENT
3-6. UNPACKING
a. Avoid damaging shipping carton and crate during unpacking.
b. Retain empty shipping carton and crate for repackaging.
3-7. INSPECTION
Heater as shipped includes following additional items:
1 room thermostat
1 power plug (4-pin)
1 bushing (used with power plug)
1 room thermostat plug (3-pin)
1 fuel pump plug (2-pin)
2 side covers
1 fuel pump
Inspect heater as follows:
a. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report
the damage on SF Form 384, Report of Discrepancy (ROD).
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies
in accordance with the instructions of DA Pam 738-750.
c. Check to see whether the equipment has been modified.
d. Inspect for loose or missing hardware.
3-2
Change 2
