FUEL REGULATOR VALVE - STEWART-WARNER 10560C24, 10560M - Continued
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENT - Continued
85. Control box (1)
RUN/OFF/START switch (2)
a.
and HI/LO switch (3)
b.
c.
d.
e.
f.
Place end of rubber hose in
drain pan.
Place switch (3) in LO
position.
Wait a few seconds for
fuel flow to stabilize.
Have assistant start timing fuel
flow as soon as fuel from
rubber hoses is directed into
graduated cylinder.
Wait 60 secondes, and turn
switch (2) to OFF position.
Wipe up any excess
fuel that may have been
spilled.
Drain contents of graduated
cylinder into drain pan.
Check table to see if fuel flow
is within limits.
FUEL
cu. in./cc PER MINUTE
DF1 , DFA, JP8
1.0 to 1.4/23 to 27
DF2
1,0 to 1.4/21 to 24
If fuel flow is not within
limits, disassemble and
Inspect fuel regulator
valve (page 2-57).
If fuel regulator valve
has just been
assembled, replace
adjustment spring and
repeat adjustment
procedure.
If fuel flow Is still not
within limits, replace
f u e l r e g u l a t o r v a l v e
(page 3-74).
g. Remove rubber hose.
3-66
TM 9-2540-205-24&P
