TM 9-2540-205-24&P
PULSED FUEL METERING VALVE - STEWART-WARNER 10560M24B1, 10560G
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning/Inspection
f. Adjustment
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
Two
Equipment Condition
Materials/Parts
Ignition control removed (page 2-47)
Valve thermostat removed (page 2-55)
Cylinder, graduated, 100cc capacity
Hose, plastic, clear, 3/16-inch ID, 50-inch
Hose, rubber, 12-inch
Humiseal (Item 4, Appendix C)
Measuring stick, 36-inch (two required)
Pan, drain
Parts Kit, valve
Rags, wiping (Item 5, Appendix C)
Screen, inlet
Sealant, silicon (Item 6, Appendix C)
Solvent, drycleaning (Item 8, Appendix C)
Tags, marking (Item 9, Appendix C)
Tape, insulating, electrical (Item 10, Appendix C)
Tie wraps (Item 11, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all wires and terminals to aid during installation (page 2-3).
Nut (2)
Unscrew.
Two tie wraps (4)
Remove.
1. Elbow (1)
2. Pulsed fuel metering
valve (3)
3. Terminal strip (5)
4. Overheat switch (8)
5. Pulsed fuel metering
valve (3)
6. Heater (12)
Lead (6) and screw assembly (7) Unscrew and remove.
Nut assembly (9) and lead (10)
Unscrew and remove.
Three screw assemblies (11 )
Unscrew and remove.
Pulsed fuel metering valve (3)
Remove.
3-68
