FUEL LINES AND FllTINGS - ESPAR V7S
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Materials/Parts
Pan, drain
Tags, marking (Item 9, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
WARNING
The fuels thls heater runs on are very explosive. Do not smoke or allow open
flame nearby when performing these adjustments. serious Injury or death to
personnel could result If this warning Is not observed.
NOTE
Tag all wires, connectors, and terminals to aid during installation (page 2-3).
1. Two clamps (1)
Two screws (2)
a. Place drain pan under hoses
and fittings.
b. Unscrew partway.
2. Adapter (3) and ring (4)
Hose (5) with two clamps (1)
Twist and remove.
Clamp screws may have
to be unscrewed and
taken out.
3. Hose (5)
Two clamps (1)
a. Remove.
b. Repeat steps 1 through 3a
for hose (6) from adapter (7)
to tee (8), for hose (9) from
fuel pump (1 O) to tee (8), and
for hose (11 ) from ring (12)
to tee (8).
4. Two clamps (13)
Two screws (14)
Unscrew part way.
5. Fuel pump (10) and inlet
Hose (16), two clamps (13)
Twist and remove.
tube (15)
6. Hose (16)
Two clamps (13)
Remove.
3-169
TM 9-2540-205-24&P
