TM 9-2540-205-24&P
FUEL LINES AND FlTTINGS - ESPAR V7S - Continued
LOCATION
ITEM
ACTION
REMARKS
REMOVAL - Continued
8. Screw (1)
Ring (2) and two washers (3)
a. Remove and separate.
b. Repeat steps 7 and 8a for
screw (4).
9. Adapter (5)
Coupling (6)
a. Unscrew and remove.
b. Repeat step 9a for
coupling (7).
10. Bracket (8) and adapter (5)
Nut (9) and washer (10)
Unscrew and remove.
11. Bracket (8)
Adapter (5)
a. Remove.
b. Repeat steps 10 and 11afor
adapter (11 ).
INSTALLATION
WARNING
The fuels this heater runs on are very explosive. Do not smoke or allow open
frame nearby when performing these adjustments. Serious injury or death to
personnel could result if this warning is not observed.
NOTE
Hoses are manufactured from bulk material. See Appendix E for new hoses.
12. Bracket (8)
13. Bracket (8) and adapter (5)
14. Adapter (5)
15. Screw (1)
16. Circulating pump (12)
17. Hose (13)
18. Fuel pump (15) and
inlet tube (16)
Adapter (5)
Washer (10) and nut (9)
Coupling (6)
Ring (2) and two washers (3)
Screw (1) with ring (2) and
two washers (3)
Two clamps (14)
Hose (13) with two clamps (14)
Install.
a. Screw in and tighten.
b. Repeat steps 12 and 13a for
adapter (11 ).
a. Screw in and tighten.
b, Repeat step 14a for
coupling (7).
Install.
a. Screw in and tighten.
b. Repeat steps 15 and 16a for
screw (4).
Install.
Twist into position.
3-171
