TM 9-2540-205-24&P
CIRCULATING PUMP - ESPAR V7S
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Personnel Required
Tool Kit, Mechanics Gen (Item 1, Appendix B)
63G
Materials/Parts
Pan, drain
Tags, marking (Item 9, Appendix C)
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
WARNING
Fuel burns easily. Fumes are explosive. Do not smoke or allow open frame
nearby when working. Failure to observe these precautions could cause
serious injury or death.
NOTE
Tag all wires, connectors, and terminals to aid during installation (page 2-3).
1. Clamp (1)
2. Circulating pump (3)
3. Clamp (7)
4.
5. Circulating pump (3)
6. Mounting bracket(11)
iNSTALLATION
7. Mounting bracket(11)
8. Circulating pump (3)
3-174
Screw (2)
Two fuel passage bolts (4) with
rings (5) and four washers (6)
Screw (8)
Circulating pump (3) with
cushion (9)
Connector (10)
Clamp (7)
Clamp (7)
Connector (9)
Unscrew part way.
a. Place drain pan under
pump (3).
b. Unscrew and remove.
Unscrew until clamp (7) ring
comes out.
Remove.
Remove.
Remove.
Install.
if clamp was replaced,
screw on new clamp will
have to be unscrewed
until ring comes out.
Install.
