TM 9-4520-251-14
4-70 BRAKES
This task covers:
a. Adjustment
b. Removal
c. Installation
Tools
Materials/Parts
Tool kit, service, refrigeration unit
Brake assembly
(Appendix B, Section Ill, Item 1)
Handle grip
Plunger
Location/Item
Action
Remarks
ADJUSTMENT
1.
Lever
REMOVAL
2.
Brake Assembly
3.
Handle Grip
If lever (1) is bent, remove
handle grip (2), insert crow-
bar or equivalent in end of
lever, and straighten. Insert
bar in either end of pivot
tube (3) to adjust or align
holding tubes (4).
Remove cap screws (5)
and washers (6 and 7)
to release the brake
assembly.
Slide handle grip (2) off end of lever (1). If de-
fective, replace.
4. Plunger
Remove nut (8A) from plunger (8).
Unscrew plunger from lever (1). If
defective, replace.
4-164
