TM 9-4520-257-12&P 0005 00
0005 00-32
Shutting Down The H-45 Type II (Liquid Fuel) Heater
1. To stop heater operation turn the fuel OFF/ON control (1) to the OFF position.
2. Outside the tent, at the fuel supply site, unstrap the fuel can from the fuel can stand, remove the fuel
can from the fuel can stand, and place the fuel can upright on the ground. Remove the gravity feed
adapter, and screw on the gas can lid. To do this, see the previous section in this work package
entitled “Refueling The Type II (Liquid Fuel) Heater,” steps 1-3.
Preparing The H-45 Type II (Liquid Fuel) Heater For Movement
WARNING
Do not attempt to disassemble a hot heater unit. Severe burns may
result.
WARNING
The H-45 Type II (Liquid Fuel) Heater with the shipping container,
weighs approximately 75 pounds (34.06 kg). Two persons must carry
the H-45 Type II (Liquid Fuel) Heater, lifting using their legs, not their
backs, to prevent injury.
1. Shutdown the H-45 Type II (Liquid Fuel) Heater as described earlier in this work package: “Shutting
Down The H-45 Type II (Liquid Fuel) Heater.” Let the heater cool completely.
2. Outside the tent, remove the guy lines (13) from the stakes. Stow the three stakes that were used to
anchor the guy lines. (Refer to the tent–specific operator manual for stowing the stakes.)
1
