TM 9-4520-258-14
4-38. WHEEL ASSEMBLY.
This task consists of:
a. Removal
b. Repair
c. Installation
INITIAL SETUP:
Tools:
Material/Parts:
Tool Kit, General Mechanics (Item 1, App B)
Cotter Pin (Item 32, App H)
Cotter Pin (Item 41, App H)
Equipment Condition:
Grease (Item 12, App E)
Wheel in stowed position (Para 4-5)
a.
Removal (Refer to Figure 4-78)
(1)
Remove cotter pin (1) and flat washer (2). Discard cotter pin.
(2)
Remove pin (3) and wheel assembly (4) from pivot (5).
(3)
Remove cotter pin (6), flat washer (7), wheel (8) and flat washer (9) from arm (10). Discard cotter pin.
(4)
Remove pin (3) from cable (11) only if replacement is necessary.
b.
Repair. Repair limited to replacement of damaged parts.
c.
Installation (Refer to Figure 4-78)
(1)
Install pin (3) and cotter pin (1) (Item 41, App H) on cable (11) (Item 65, App F).
(2)
Install flat washer (9), wheel (8), flat washer (7) and cotter pin (6) (Item 32, App H) on arm (10).
(3)
Install wheel assembly (4) on pivot (5) and install pin (3).
(4)
Install flat washer (2) and cotter pin (1). Service grease fitting (12) with grease (Item 12, App E).
4-184
