TM 9-4520-258-14
5-7.
FRAME ASSEMBLY - continued.
a.
Disassembly - continued (Refer to 5-23)
(5)
Remove two nuts (1), two lockwashers (2), two screws (3), four flat washers (4) and heat exchanger
support brace (5).
(6)
Remove grommet (6).
(7)
Remove rivnuts (7) as required.
(8)
Remove receptacles (8) as required by drilling out two rivets (9).
(9)
Remove four nuts (10), four lockwashers (11), flatwashers (12), four screws (13) and wheel pivot (14).
Figure 5-23. Frame Assembly
5-38
